Disk Network Sharing

You can enable data stored in the failover NVR/VMS to be retrieved from the main NVR/VMS.

As shown in the photo above, recording data cannot be retrieved in case of failure in the main NVR/VMS.

Data recorded in the failover NVR/VMS.

The main NVR/VMS imported data from the failover NVR/VMS after setting up disk network sharing.

Once the disk network share is set up on the NVR/VMS, the same discovery is possible on the CMS.

It can be set in versions 2.9.22.11.1 and later.

Failover Setting Up NVR/VMS Disk Sharing

In the failover NVR/VMS, select Settings - System - Disk - Additional Settings - Network.

Check the disk on the network for sharing and set a password.

Add a Network Disk to the Main NVR/VMS

In the main NVR/VMS, select Settings - System - Disk - Add.

Select the type of failover equipment and enter the IP address and password. It can be added by checking the disk number, pressing the check button, and then checking. For VMS, check the server number.