기본 설정 가이드
Basic guide
기본 설정 가이드Basic guide
Basic guide
기본 설정 가이드Basic guide
  • Basic guide
  • NVR/VMS
    • Setting up a network
      • Dynamic DNS (DDNS)
      • Access list / IP filtering
      • Using HTTPS
      • Network port (port)
      • Streaming URL Path
    • Camera Management
      • Network camera
      • Camera channel management
      • OSD management
    • Managing disks
    • Setting Up Recording
    • Setting the Time
    • Pan/Tilt/Zoom
      • Preset
      • Tour
      • External PTZ Controller Settings
    • User
    • Search
    • Backup
    • Setting Up Multi-Monitor
    • Adding a License
      • Adding a Channel License
      • License plate recognition, fire/smoke detection license added
    • Failover settings
      • IP Failover
      • Disk Network Sharing
    • Load/Save system Configuration
    • Firmware Update
      • USB Memory Update
      • CMS Remote Update
    • Using the HTTP API
  • CMS
    • Setting up a network
    • Host Management
    • Group Management
    • Live video
      • Show groups
      • Show PTZ
      • Preset, Tour, Hot Key Settings
      • Setting the Screen Mode
      • Specify screen mode for a group
      • Using OSD
    • Search
      • To search for events
    • Backup
      • Area Masking Backup
    • Save/Recover Windows Batch
    • NTP Time Server Settings
    • User
    • Video Background Picture
    • Job
      • Job Type
      • Working with Events
      • Reservation Tasks
      • Job Registration Example
    • Update Version
  • NDS
    • Setting up a network
    • Setting the resolution
    • Configuring the layout
    • Video Background Picture
    • Firmware Update
      • USB Memory Update
      • CMS Remote Update
Powered by GitBook
On this page

Was this helpful?

  1. CMS

Setting up a network

PreviousUsing the HTTP APINextHost Management

Last updated 12 days ago

Was this helpful?

Click on the top right to enter wired network settings, such as wired or wired.

If it is not confirmed at the top right, check Settings - Network.

Press the right cogwheel to proceed with the IP setup.

After changing the setting, apply the green toggle by turning the button off and on.

The network information set up is available in a closer view.