Network port (port)

Settings - You can check and change ports on the network.

Below are the default ports used by NVR.

Network server port: 8081

HTTP server port: 80

RTSP server port: 554

Remote control port: 5900

SSH port: 22

If NVR+/VMS has multiple servers, 1000 will be added each time the server number goes up. This is available on each server network settings page.

Example) [Server 1] Network server port: 8081 HTTP server port: 80 RTSP server port: 554 [Server 2] Network server port: 9081 HTTP server port: 1080 RTSP server port: 1554 [Server 3] Network server port: 10081 HTTP server port: 2080 RTSP server port: 2554