# Setting Up Recording

## How to record your schedule <a href="#schedule" id="schedule"></a>

<figure><img src="https://1977198238-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOhqExQGOBVqTCHEAJ07o%2Fuploads%2FU28LU8Y3Bi3wqsfuRmyD%2Fimage.png?alt=media&#x26;token=7af72423-87c0-47e1-9849-5a2105d7f3ed" alt=""><figcaption></figcaption></figure>

The initial recording setting is "Always record camera" and continuous recording is the default setting. Therefore, as soon as the hard disk is connected, recording starts.

Always turn off the camera recording check and press the schedule button to record in a schedule manner.

<figure><img src="https://1977198238-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOhqExQGOBVqTCHEAJ07o%2Fuploads%2FwUQUNNtMpJVlOWbfwCY5%2Fimage.png?alt=media&#x26;token=6994467f-7da4-4026-878f-f27d3c3a5afa" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1977198238-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOhqExQGOBVqTCHEAJ07o%2Fuploads%2Fci1TqOfeDywAUWaWSYJz%2Fimage.png?alt=media&#x26;token=a8e83fc3-8fea-4c84-a55a-24fcf5726e33" alt=""><figcaption></figcaption></figure>

## How to Record an Event <a href="#event" id="event"></a>

### Motion detection <a href="#motion" id="motion"></a>

We explain the motion detection recording method, which is a representative event recording method.

Always uncheck the camera in Recording Settings.

Under Settings - Events - Motion Detection, select the camera to use the motion detection event.

<figure><img src="https://1977198238-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOhqExQGOBVqTCHEAJ07o%2Fuploads%2FB6w7nmWCSM1dWh7RNOjg%2Fimage.png?alt=media&#x26;token=b779f75b-40d5-4748-85d6-d8656e56d296" alt=""><figcaption></figcaption></figure>

Motion detection events should be enabled on the camera by default and motion detection cannot be detected if the camera does not send the motion detection event to the NVR.

<figure><img src="https://1977198238-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOhqExQGOBVqTCHEAJ07o%2Fuploads%2FD1xXATZwtebD98SdY7uw%2Fimage.png?alt=media&#x26;token=73d60031-b1e4-43b9-937b-2edec4085cff" alt=""><figcaption></figcaption></figure>

Press the event link button to confirm that "Recording" has been added to the action.

Other events (sensors, emergency bells, license plate recognition, fire detection, etc.) can also be recorded and used through the recording operation in the event connection.

{% embed url="<https://youtu.be/-fcXvdQMLwc>" %}
